MT-3
MT-3 - Frame and Panel Set 2x0.50m
The MT-3 is a 2x0.50m frame and panel set, designed to provide a strong and secure surface for events, similar to the MT-4. It includes SU-MT connection systems for easy installation and high stability.- Maximum load: 1,000kg/m² uniformly distributed.
- Weight: 44kg.
- Materials:
- Panel: 21mm phenolic plywood with non-slip engraving and sealed edges.
- Frame: Aluminum alloy 6005-T6.
- Use: Weatherproof and water-repellent.
- Frame height: 92mm.
- Frame and panel 1x0.50m (ref. MT-1).
- Frame and panel 1x1m (ref. MT-2).
- Frame and panel 2x1m (ref. MT-4).
-Maximum height: 5,30m
-Maximum load: 230kg
-Height folded: 1,82m
-Weight: 78kg
-Winch: AL-KO 900 Compact 900kg
-Workspace: 1,44 x 1,44m
-Minimum charge: 25kg
-Material: Galvanized steel under EN 10305-5.
-Cable: Galvanized steel under EN 12385-4.
-Maximum cable load: 2.870kg
-Cable twisting resistance : 1.770N/mm²
-Cable diameter: 6mm
-Cable composition: 7×19+0
-Security system: External trigger in sections
-Bubble level: to vertically adjust the tower.
-Closed base area: 0,47 x 0,47m
-Leg attachment: Safety pins
Base-leg trigger: The leg trigger allows it to be anchored to the base in a more agile way, through a push system that replaces the old and uncomfortable ring triggers.
Polyamide plates: This material offers greater resistance than metal and does not wear out. They rest on the surface without damaging the floor, carpets, etc.
Safety pins: The safety pins prevent the load from collapsing. In addition, they allow the selection of different heights and the raising of all the bars equally, distributing the load from the main bar to the last bar, which extends the useful life of the tower.
Winch: Our winches are manufactured by high-quality companies with recognized prestige. They are durable and long-lasting. In addition, they are oversized for greater safety and better cable traction.
Reinforced base: All our towers have a reinforced iron base capable of supporting large weights and high altitudes.
Level: The new location of the level at the base allows for more comfortable and precise tower stabilization.
Pulleys and pulley holders: Made of reinforced steel, they offer greater resistance.
